Jump to Navigation

VoIP
PBX

Simultaneous, low-cost calling for multiple analogue phones

The Horizon VoIP PBX allows 8 analogue telephones to be connected for simultaneous calling over an internet link - more than any other system today for the bandwidth available. Additional models are also available that allow up to 24 simultaneous calls. It's ideal for deployment in a single office or multi-office scenario.

The VoIP PBX is a Thrane Accredited Solution but is not just for sea, it is equally adept on land. See the OCENS Horizon VoIP PBX case study in the related content to find out more.


Low-cost IP telephony

  • Low-bandwidth VoIP-based SmartPacket™ technology.
  • Flexibility to choose the call quality during the call for optimal cost/quality control.
    • Level 1: 2.15kbps
    • Level 2: 3.75kbps
    • Level 3: 5.75kbps
      (Bandwidth required for both talking and listening.  Excludes IP headers at all levels)
  • Voicemail (send and receive).
  • Supports pre-paid and post-paid billing options within the same account.

Easy to install, use and manage

  • Rapid deployment with minimal equipment to install on site.
  • Mounting brackets enable flexible installation on the floor, wall or ceiling – ideal for confined spaces.
  • Only requires a wired internet connection and mains power supply.
  • Supports connection with any 2-wire analogue telephone.
  • Automatic set-up and all firmware upgrades managed centrally from the Horizon network.

Fully mobile

  • Unique number and PIN allocated to each user.
  • Enables “follow-me” service where you receive VoIP calls and voicemail on any Horizon phone in your company – regardless of location.

Completely secure

  • PIN-code protected to prevent unauthorised calling.
  • PIN protection can be disabled on an individual user basis if required.
Technical Information
Connectivity:
 Audio analogue (SPDIF connector inside)
4 x USB 2.0 (rear), 2 x USB (front)
1 x RS-232
1 x PS/2 Keyboard/mouse
1 x PCI slots and 1 x mechanical slot
2 x GBit LAN
Voice processing:
 Model 8p1001 – 2 x A200 Sangoma FXS
Model 8p1002 – 2 x B840 Sangoma FXS
Dimensions

Without Bracket
 With Bracket
Width: 200 mm (7.9 in)
 240 mm (9.5 in)
Height:
107 mm (4.2 in)
 110 mm (4.3 in)
Depth: 250 mm (9.8 in)
 250 mm (9.8 in)
Weight: 2.16 kg (4.8 lb)
 2.96 kg (6.5 lb)
Power Specifications
DC input voltage:
 19-24V DC, -10%, +2%
DC input current: 9A maximum
Power consumption at 19V DC:
- at start-up
- normal conditions
2.3A
1.8A
Operating Conditions
Operating temperature: 0°C to 45°C (32°F to 113°F)
Temperature change: Max +10°C/30 minutes (+50°F/30 minutes)
Relative humidity: 10 to 90%
Atmospheric pressure: 700-1100 hPa
Condensation generation: Non-condensing
Vibrations: 0.7g
Storage Conditions
Temperature: -20°C to 60°C (-4°F to 140°F)
Relative humidity: 0 to 90%
Atmospheric pressure: 280-1100 h0Pa
Condensation generation: Non-condensing
In the Box:
  • Horizon VoIP PBX (8P1001 unit)
  • 2 floor/wall mounting brackets
  • AC/DC power supply
  • 3 main power cables (Euro, US, UK)Ethernet cable (3 metres)
  • 8 shielded telephone cables – RJ-11 (RJ-8) narrow (4P-4C) to RJ-11 (6P-4C)
  • PS/2 splitter cable
Additional equipment required:
  • A broadband internet connection
  • Up to 8 analogue handsets
  • Additional standard RJ-11 to RJ-11 extension cables and couplers (depending on the location of the handsets)