Beam
IridiTRAK (RST430)
Beam IridiTRAK (RST430) terminal is a small and lightweight device that uses the latest technology in providing global alert, tracking and monitoring services. With its inbuilt 16 channel GPS engine and its Iridium 9601 Short Burst Data modem you can track your vehicles, vessels, assets and personnel virtually anywhere on earth.
IridiTRAK (RST430) is specifically designed to support a range of optional “man down” accessories for monitoring personnel in lone worker applications and has an inbuilt alert acknowledgement protocol for added safety.
Whilst the IridiTRAK devices can be configured to originate messages to other third party applications, the Iriditrak devices connects seamlessly to the Beam LeoTRAK-Online global fleet management system www.leotrakonline.com
- 100% Global Coverage
- 9 – 32V DC input
- In – built Iridium Satellite modem
- Small and lightweight
- 16 Channel In-built GPS
- Short Burst Data capable: Mobile Originated - 340 Bytes; Mobile Terminated - 270 Bytes
- Supports Alert buttons
- Digital IO
- Analogue Input
- Simple Installation / Configuration
- Multiple alert notifications
- Signal LED
- Support simultaneous tracking
- Sleep mode – low power usage
| Weight: | 0.3kg (0.66lbs) |
| Length: | 114mm (4.5") |
| Width: | 104mm (4.1") |
| Depth: | 28mm (1.1") |
| Interfaces: | USB Config Port: 5 - pin Mini-B Female socket |
| Other General: | Iridium Module: 9601 L-Band transceiver frequency: 1616-1625 MHz SBD Message Size- Bytes: MO -340, MT - 270 Average Power: 7W during a transmit slot (max) Average Power: 0.6W during a frame (typical) Receiver Sensitivity: -118.5db at 50W (typical) Duplexing method: TDD (Time Domain Duplex) Antenna Connector: SMA Female socket |
| System Specifications: | I/O Specification: 2 x Alarm Loops (2 inputs and 2 outputs) Alarm Mode: "Normally Closed" Loop IN to OUT Up to 500m cable run / multi buttons Ignition (Acc) Sense, ON / OFF inputs (0 to 32Vdc Tolerant) High (1) > +7Vdc |
| What's in the box: |
Main RST430 – IridiTRAK unit
Main Power Loom
USB Configuration Cable
Installation & User Manual
Quick Start Guide
CDROM - User Manual, IridiTRAK Management Configuration Software
|
| Compliance: |
- CE, C-Tick , A-Tick
- A – Tick #N13271
- IEC60945:2002 (sections 9 &10)
- Fully ROHS compliant EU2002/95/EC (All 6 substances)
- Iridium Approved
- Safety – Low Voltage Directive - IEC / EN / AS / NZ 60950-1
- Flame Retardant – UL94.0
|
| Power: |
Input Voltage DC: 9 - 32VDC, 2A
Plug Pack (Not Included): 90 – 250VAC, 50/60Hz input
Power Consumption:
Idle (registered) Mode: 1.5 W
Transmit Mode: 1.8W
Sleep Mode: 20mA Current (0.02A)
|
| Temperature: |
Operating Range: -30°C to +70°C (-22°F to +158°F)
Storage: -35°C to +85°C (-31°F to +185°F)
|
| Relative Humidity: |
85% non condensing
|
| Environmental Other: | Atmospheric Protection: Conformal Coating to Circuit Board |
| IsatDOCK GPS Module: | Receiver Type: 16 Channel – antaris4 positioning L1 Max Navigation Update Rate: 4 Hz (default 1Hz) Accuracy: Position 2.5mCEP, 5.0mSEP Acquisition: Cold <41s / Warm <33s / Hot <3.5s Antenna Supply: 3.3Vdc Antenna Connector: SMA Female socket – 50 ohms Operational Limits: Altitude 18000m Velocity 515m/s |
Printer-friendly version