Beam
RemoteSAT RST100
Beam RemoteSAT RST100 terminal is capable of presenting Dial, Busy and Ring tones to suit country specific requirements as well as auto-dial or restricted dial functionality. It also supports access to the complete range of data services provided by Iridium including Short Burst, Circuit Switched Data and Direct Internet as well as SMS.
RemoteSAT RST100 has been designed to be used in fixed site, maritime and emergency service applications where permanently installed reliable communications services are required. The Beam RemoteSAT RST100 device enables a Beam TrackALERT, RST030, alert tracking interface to be connected directly to the terminal and there is also a purpose built back-up battery available that can provide up to 24 hours standby time for mission critical applications.
| Weight: | 2.25kg (4.9lbs) |
| Length: | 225mm (8.8") |
| Width: | 271mm (10.6") |
| Depth: | 45mm (1.2") |
| Display: |
Power: Green
Signal: 3 colour
Call: Yellow
Voicemail: Green
|
| Interfaces: | Intelligent Handset: RJ45 DPL BUS Telephone / POTS: RJ-11 2 -wire / TN 12 or 600 ohm Data Port: RS232 Serial Interface Log Port: RS232 Serial Interface Power: 2 Pin screw type |
| What's in the box: |
RST100 Main terminal
Mounting Brackets
AC 110/240V Plug Pack
DC 1.5m (59") Power Cable
Data Cable
User & Installation Manual
CD - Beam Management System, AT Commands, Manuals
|
| Compliance: |
- IEC60945
- Germanischer Lloyd
- American bureau of Shipping
- Electrical Safety
- EMC Compliance
- C tick
- CE Compliance
|
| Power: |
Power Input Voltage: 11-32 V DC
Power Consumption (AMPS): 12 V DC / 24 V DC
Stand-by: 0.35 / 0.16
Transmit: 0.51 / 0.25
Stand-by - inc handset: 0.47 / 0.22
Transmit - inc handset: 0.59 / 0.29
|
| Temperature: |
Operating temp: -15°C to +55°C (+5°F to +131°F)
Storage: -30°C to +70°C (-22°F to +158°F)
|
| Relative Humidity: |
93% non condensing
|
| Vibration (ADU), Operational: |
2Hz - 13.2 Hz & 13.2 Hx - 100 hz
|
| Environmental Other: | Corrosion: after 2hrs salt spray |
Printer-friendly version